DELTA 36-T30 T2 30-Inch Fence and Rail System
by Delta
List Price:
Our Price: $199.99
You Save: $65.15 (25%)
Availability: Usually ships in 24 hours
Category: Tools
See more product details
Product Details
Manufacturer: DeltaModel: 36-T30
Product features:
- The fence clamps securely to front tube and rear rail
- Steel tube fence body glides easily to handle quick and repetitive work along with precision ripping and squaring cuts
- Projected aluminum face attaches to solid-steel angle iron and tubing
- 3-point T square locking system is accurate with 1/64 of an inch
- Added rear hold down support when using jigs and featherboards
- Wixey WR700 Saw Fence Digital Readout
- This Old House
- Creating a New Old House: Yesterday's Character for Today's Home (American Institute Architects)
Description of DELTA 36-T30 T2 30-Inch Fence and Rail System
Easily and accurately attach the Delta T2 Fence System to your table saw. Along with the fence, the 36-T30 includes a steel guide tube with scale, front & rear support rails, and mounting hardware.Tools and Hardware Reviews of DELTA 36-T30 T2 30-Inch Fence and Rail System
Customer Review: Great upgrade for an older Delta table saw
Summary: 5 Stars
I was looking for more rip capacity and ease of use in a fence for my 1970's vintage Rockwell (Delta) contractor's saw. I've long coveted the Beisemeyer-style fences, but I could not justify spending $300+ for the upgrade. When Delta released this fence at this low price, I could not wait any longer. This fence works great for less than half the price of the originals.
I have to admit - I purchased the fence from another retailer for a bit less money. But the Amazon deal is actually better - you get the legs and a table board along with the fence for almost the same price. My review will be confined only to the fence itself.
The fence comes nicely packaged. I was prepared to spend an afternoon doing the installation, but to my surprise, the fence bolted right onto my saw in about 20 minutes. I guess Delta has not changed the spacing of the bolt holes for the rails over the past 30 years. The instructions were pretty clear, and I had aligned the fence with the saw's slots in a few minutes. The fence includes 2 sets of alignment bolts that make accurate alignment in two planes simple. Although I did not use all the hardware, the fence includes a variety of additional bolts - I am guessing these are for installation on saws that use stamped steel wings, or perhaps different drilling of holes.
This fence is a significant upgrade over my original fence. I get an additional 6-8" of rip capacity to the right of the blade (and this is key when trying to rip a piece of plywood in half). The fence glides smoothly throughout its travel left and right. It includes a gauge that makes quick measurements possible by sight (I still use a ruler just to make sure). Although the T2 is a "lighter" version of the original Beisemeyer, this unit is solid - at least for my needs. When the cam is locked there is no noticeable movement side to side. While my old fence had a slight bow that could never be removed, this unit is perfectly straight along its length.
Overall, this is an upgrade I'm extremely glad to have made. I would heartily recommend this fence for anyone looking to expand the capacity of their table saw without dropping a huge amount of cash.
Fences
Tools and Hardware
Bestsellers in Fences
WoodRiver Clamp Guide, 24"Woodcraft Supply; Tools
Best price: $31.99
WoodRiver Clamp Guide, 50"Woodcraft Supply; Tools
Best price: $30.09
TS-LS Joinery System, 52" Range, Incra LS52-TS-WFIncra; Tools
Incra LS Positioner, 635mm Range, Incra M-LS25Incra; Tools
INCRA LS52-TS TS-LS Table Saw Fence 52-Inch RangeIncra; Tools
Best price: $559.97
Price in other shops:
Carter Products MF-16 MagFence 16-Inch Magnetic FenceCarter Products; Tools
Price in other shops:
Exaktor EX100 Table Saw FenceExaktor; Tools
Best price: $210.31
Price in other shops:
Delta 79-057 12-Foot Left-1/ 2-Inch Wide Metric/ English Adhesive-Backed Measuring TapeDelta; Tools
Best price: $14.62
Price in other shops:
Delta 28-857 24D SawsDelta; Tools
Price in other shops:
Similar Tools and Hardware Products
Kreg K4MS Jig Master SystemKreg; Tools
Best price: $139.00
Price in other shops:
Kreg DDS 3-Inch No.2 Square Driver Bit and 6-Inch No.2 Square Driver Bit for Kreg Pocket Hole SystemsKreg; Tools
Best price: $3.64
Price in other shops:
General Tools MMD4E Digital Moisture MeterGeneral Tools; Tools
Best price: $30.00
Price in other shops:
MSI-PRO 225-D 51120 Horizontal Quick-Release Toggle ClampsMSI; Tools
Best price: $3.99
Incra MITER1000SE Miter Gauge Special Edition With Telescoping Fence and Dual Flip Shop StopIncra; Tools
Best price: $140.00
Price in other shops:
Bosch 1617EVSPK 12 Amp 2-1/ 4-Horsepower Plunge and Fixed Base Variable Speed Router Kit with 1/ 4-Inch and 1/ 2-Inch ColletsBosch; Tools
Best price: $200.00
Price in other shops:
Power Twist V-BeltFENNER DRIVES; Tools
Best price: $25.90
Price in other shops:
HTC HTC2000 Universal Mobile BaseHTC; Tools
Best price: $64.50
Price in other shops:
Incra MITERV27 Miter V27 Miter GaugeIncra; Tools
Best price: $54.95
Price in other shops:
Wixey WR300 Digital Angle GaugeWixey; Tools
Best price: $33.99
Price in other shops: