DELTA 15-333 15-Inch Variable Speed Drill Press with Tilting Table and Magnetic Starter
by Delta
List Price:
Our Price: $3,542.03
You Save: $3137.17 (47%)
Availability: Usually ships in 24 hours
Category: Tools
See more product details
Product Details
Manufacturer: DeltaModel: 15-333
Product features:
- Extra-large spindle bearings 6 PLUS 6- and -VS6 spindle and spindle pulley are supported by four over-sized, pre-loaded, lubricated-for-life ball bearings.
- Wide, test-proven speed range gives you a true 10-to-1 speed ratio. You get the exact speed you need for every drilling job on any material- 450-4,700 rpm with a 1,725 rpm motor.
- Quick belt tension release is provided by the pivoting motor mounting plate which has a reverse, self-locking taper on the spring-loaded, rubber-tipped plunger that quickly restores correct belt tension
- Extra-long quill travel gives the extra depth you need for deep-hole jobs like skip and gang drilling.
- Six speeds offer unbelievably wide range of speeds with a low-cost 1,725 rpm motor- 425; 600; 1,100; 2,050; 3,900 and 5,500 rpm- 11.8 to 1 speed ratio.
- DELTA 17-922 9-Inch Drill Press Vise Clamp
- Kreg K3MS K3 Master Pocket Hole Jig System
- Bench Dog 10-035 Bench Cookie Work Grippers, 4-Pack
- Kreg Jig K4 Pocket Hole System
- Kreg R3 Jr. Pocket Hole Jig System
Description of DELTA 15-333 15-Inch Variable Speed Drill Press with Tilting Table and Magnetic Starter
The DELTA 15-333 Variable Speed Drill Press features a 3/4 HP three-phase motor that has a 24-volt push-button, magnetic starter. It has a variable-speed drive allowing you to select a different spindle speed while the machine is running. The drill maintains proper belt tension automatically so you'll always have full power transmission. A snubber feature holds speed settings constant no matter the load conditions. The quill is large with a two-inch diameter, and a long quill travel lets you do deep-hole jobs such as skip and gang drilling. The drill features extra-large spindle bearings "6 PLUS 6" and "VS6" spindle and spindle pulleys that are supported by lubricated-for-life ball bearings. The table tilts 90 degrees in both directions and measures 11 x 14 inches. Included is the table, motor and controls, belt and pulley guard, belt and motor pulley, self-locking depth stop, depth gauge, self-ejecting chuck key.Drill Presses
Tools and Hardware
Bestsellers in Drill Presses
Wilton 15-Inch Drill Press Floor Model, 115/ 230V 1PH, 1HPWMH Tool Group; Tools
Price in other shops:
Milwaukee 4209-1 Electromagnetic Drill PressMilwaukee; Tools
Best price: $1,528.70
Price in other shops:
Wilton 2500 15-Inch Floor Drill PressWMH Tool Group; Tools
Price in other shops:
Northern Industrial Mortising Attachment - For Wood Use OnlyNorthern Industrial Tools; Tools
Best price: $49.99
Factory-Reconditioned DELTA DP350R Shopmaster 1/ 3 Horsepower 12-Inch Bench Drill PressDelta; Tools
Price in other shops:
Palmgren 61301 AP30 3-Ton Manual Arbor PressPalmgren; Tools
Best price: $248.18
DEWALT DW151 Heavy-Duty 6 Amp 1/ 2-Inch Magnetic Drill PressDEWALT; Tools
Price in other shops:
Delta DP115 Shopmaster 8-Inch Deluxe Bench Top Drill PressDelta; Tools
Price in other shops:
DELTA 17-787 1/ 2-Inch Bit SetDelta; Tools
Price in other shops:
Milwaukee 4210-1 12.5 Amp Electromagnetic Drill Press with 3/ 4-Inch Motor and ChuckMilwaukee; Tools
Best price: $1,266.30
Price in other shops: